მეტალის ნაკეთობები

A linear pendant in steel, made to the length of the surface it lights.

Solid oak doors with a shaped head and a matching frame, cut and finished in the workshop.

A horizontal slat fence and gate coated in deep red, set against a white house.

A shaped steel canopy over an entrance door, braced back to the stone wall.

Slat panels coated in a timber finish, so the boundary reads as wood but behaves like steel.

Horizontal slat panels between concrete piers, with a matching gate on the same module.

A tall vertical-bar fence with shaped tops, run along a gravel drive and coated matte black.

A gate leaf in perforated steel — privacy from the street, air and light through the pattern.

A solid-faced driveway gate for a brick house, hung to swing clear of the slope.

A double driveway gate with a pierced decorative panel, primed and thermally coated for permanent outdoor use.

A tight spiral in folded steel plate against bare concrete, treads left open and the whole stair coated matte black.

Insulated entrance doors with panelled faces and a keypad lock, finished to match the hallway.

Black steel double doors dividing a hallway, glazed the full height of the frame.

A pivoting entrance door in black steel and glass, paired with a timber-clad reveal.

A run of steel-framed glazing under a timber ceiling, with a matching door onto the terrace.

A slim steel-framed glazed door onto the garden, sized to the opening so the frame stays as thin as possible.

A floor-to-ceiling glazed grid screen separating a stair from the hallway while keeping the light through it.

An external flight in coated steel, fixed to the wall and detailed to shed water.

An open-riser stair with a full-height glass balustrade, so the flight reads as structure rather than a wall.

A quarter-turn stair in black steel with oak treads and a vertical-bar balustrade carried through to the landing.

An open-riser flight on a black steel stringer, with thick oak treads and a slim matching balustrade.

A black steel spiral stair rising to a terrace level, with solid treads cantilevered from the central column.

პროექტის ტიპი: მეტალის ნაკეთობები